fbpx
Igcse Physics Revision NotesO Level Physics Revision Notes

Turning Effects Of Forces

Moments:

The moment of a force is the product of the force and the perpendicular distance from the pivot to the line of action of the force.

Get O/A Levels & IGCSE Solved Topical Past Papers, Notes & Books

🚚 Delivering all over PAKISTAN 🇵🇰 & ✈️ Internationally 🌐

Contact Our Expert Team for Free Guidance & Suggestions

Moment of force =  Force × Distance

SI unit: Nm (Newton per metre)

It is a vector quantity as it has both magnitude and direction.

When more than one force acts in one direction, their overall turning effect is just the sum of their moments.

Principal of a Moment:

For a system to be in equilibrium, the sum of the clockwise moment must be equal to the sum of the anti-clockwise moment.

Turning Effects Of Forces - Moments

Sum of anticlockwise moment =sum of clockwise moment

F1×D1=F2×D2

Conditions Of Equilibrium:

  • The resultant force acting is zero or the forces are balanced.
  • The resultant moment about the pivot is zero.

 

 

 

Types of Equilibrium:

Stable Equilibrium: Capture12

Un Stable Equilibrium:Capture13

Neutral Equilibrium:Equilibrium

Centre Of Gravity:

Centre of gravity of an object is defined as the point through which weight appears to act.

It depends on the distribution of the mass.

The centre of gravity may also lie outside the object e.g. a ring   

 

Experiment For Finding Out The Centre Of Gravity Of An Irregular Shaped Lamina:    

Experiment For Findin out Centre Of Gravity                          

  • Make three holes near the edge of the lamina. The holes should be as far apart as possible from one another.
  • Suspend the lamina through one of the holes using a pin.
  • Hang a plumb line on the pin in front of the lamina.
  • When the plumb line is steady draw a line on the lamina over the plumbline.
  • Repeat the above for other two holes.
  • The point of intersection of the three lines is the position of the centre of gravity.

Precautions:

The holes should be small so that not too much of the lamina is removed.

The lamina should be free to swing about its point of suspension.

 

Stability:

Stability refers to the ability of the object to regain its original position after it has been tilted slightly.

Stable equilibrium:

  • Occurs when an object is placed in such a position that any disturbance effort would raise its centre of gravity.
  • The centre of gravity will still fall in its base so it returns to its original position (as an anti clockwise moment is created as shown above by the arrow

Capture15

Unstable equilibrium

  • Occurs when an object is placed in such a position that any disturbance effort would lower its centre of gravity
  • The centre of gravity will no longer fall in its bade so it topples over to fall into a more stable position ( A clockwise moment is created shown by an arrow)

Capture16

Neutral equilibrium:

Capture17

  • Neutral equilibrium occurs when an object is placed in such a position that any disturbance effort would not change the level of its centre of gravity.
  • Thus, no such moment is created

How to determine the stability of an object:

  • The area of its base should as wide as possible.
  • Centre of gravity should be as low as possible.

Capture18

 

Related Articles

8 Comments

Leave a Reply

Back to top button
Open chat
Need help? Ask Us!
Hello !
How can we help you?